Selleys SolarFlex Sealant

Selleys SolarFlex provides protection from ultraviolet (UV) radiation and other harsh weather elements. Harsh Australian and New Zealand conditions make the choice of an effective solar/weather protection solution critical.    

Features

• Superior weather protection
• Long lasting flexibility
• No primer required before painting
• Water tight seal with a 10 year guarantee*
• Adhesion to wet or damp surfaces
• Non-bubbling
• Better curing and extrudability (>5°C) with no slump
• Paintable with water-based paints after product skins in 60 to 90 minutes
• Low VOC**

1. Ensure substrates are clean and free of oil, grease or loose particles.
2. Cut seal and nozzle and fit to cartridge, then place in caulking gun.
3. Hold caulking gun at 45° angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
4. For neat joints, use masking tape on both sides of the joint and remove before skinning.
5. Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.

Limitations:

• #Not suitable on polyethylene, polypropylene or Teflon.
• Cure excess product before disposal.
• Not for permanent water immersion or below water-line use. For water immersion please use Selleys Marine Flex