Specialized Masonry Levelling Compound – 18kg

• Specialized Masonry Levelling Compound
• 18kg bag
• Fibre-Reinforced solid plastering render

• MLC can be placed using a steel trowel and conventional hand plastering techniques or can sprayed applied using a plastering pump. MLC must be applied a minimum of 4mm thick to ensure it maintains its cohesive strength and can be applied up to 50mm thick in one coat. If any areas require greater than a 50mm application they must be done in several coats and left to dry between. If the pointing between the bricks is in poor condition or if the dwelling is subject to excessive movement a layer of 160g alkali-resistant fibreglass mesh can be embedded into the MLC to increase the strength of the finished product. All stress points should be reinforced with butterflies of mesh. Once a layer of plaster has been applied to the substrate it should be floated or screeded flat to achieve a level plane which is free of deviations. Once the material is dry it can be sanded flat using a longboard or scraped with a broad-knife to remove any ridges or minor bumps which have been left behind. The finished thickness of the MLC is dependant on the condition and alignment of the substrate it is covering.

No product specifications available.